[REVIEW] Anubis Multi Function Base

I recently got my hands on this cool looking action base called the Anubis Multi Function Base. So I'm sharing with you guys this sort of unboxing/review.

Unlike the regular action bases that we usually see, this comes in a box. The box feels thick and solid. And most of the text is in chinese(I think). 

The primary reason why I got this was because of the raised base. I measured the base and it's roughly 33 mm or 1.2 inches. My caliper wasn't able to fully measure the diameter of the base. The base's body measures about 141.6 mm or 5.5 inches. there is some extra lip at the bottom part so maybe that's where it got the 7 inch label in the box.

We get 2 base plates. 1 detailed and 1 plain.

And felt sticker. Maybe for the plain base plate.

We also got 3 identical runners. These are for the sub arms.

There's quite a screws to be used for the sub arms.

The manual is just 1 piece printed on both sides. Luckily the instructions and images are clearly displayed since the part numbering in the manual and in the runners are not the same. Though you can follow the instructions since you should be able to determine which part was used based on the pics in the manual.

Assembling the pieces, you get 3 of these sub arms.

Here's a pic with the 1/144 FG Age 1 Normal gunpla.

After doing some research, I found that they also released versions for the Unicorn Gundam. Sinanju, and the Gaia gundam